Carrier 19EB Control Panel

[can]

I have several D's and E's on MCS control panels with no issues. Way cheaper than a Carrier conversion. You can get graphics or not, your choice!

What is MCS?

[coldrig]

I have several D's and E's on MCS control panels with no issues. Way cheaper than a Carrier conversion. You can get graphics or not, your choice!

Hi,do you have MCS CONFIG Software I need copy to open sample files.
Thanks for any help.

[chiller mekanik]

MCS Controls http://www.mcscontrols.com/micros.html#MCS-MAGNUM

These guys will build whatever you want. I would be willing to bet they can even adapt to the sensor that is buried in the compressor section. Therefore, you want have to take it apart & deal with that crazy vertical & horizontal gasket arrangement.

[chiller mekanik]

What is MCS?

Thats custom made for your chiller. Graphics are optional.

Look at abs post & follow the link. If you have any questions, go to my profile & you can shoot me an e-mail. Or, call me. But, the international charges might be a little costly.

[can]

Thats custom made for your chiller. Graphics are optional.

Look at abs post & follow the link. If you have any questions, go to my profile & you can shoot me an e-mail. Or, call me. But, the international charges might be a little costly.

Thank you for advise. If we are go for the MCS. It have any support in Hong Kong! We are still like to use the 32XR or standred PIC III control. Normally, we will only purchase the control, actuator and SMM module for chiller using PIC I control, or purchase
the Power Box too if the chiller using the 32SM or 32MP control. And modify the control wiring by myself. It will save most of money.

[stickerhead]

Thank you for advise. If we are go for the MCS. It have any support in Hong Kong! We are still like to use the 32XR or standred PIC III control. Normally, we will only purchase the control, actuator and SMM module for chiller using PIC I control, or purchase
the Power Box too if the chiller using the 32SM or 32MP control. And modify the control wiring by myself. It will save most of money.

Call James Mitchell at Micro Control Systems and ask him. They sell stuff all over the world including the middle east- US 239-694-0089