Page 2 of 2 FirstFirst 12
Results 14 to 19 of 19
  1. #14
    Quote Originally Posted by stickerhead View Post
    I have several D's and E's on MCS control panels with no issues. Way cheaper than a Carrier conversion. You can get graphics or not, your choice!
    What is MCS?
    Can

  2. #15
    Join Date
    May 2007
    Posts
    168
    Quote Originally Posted by stickerhead View Post
    I have several D's and E's on MCS control panels with no issues. Way cheaper than a Carrier conversion. You can get graphics or not, your choice!
    Hi,do you have MCS CONFIG Software I need copy to open sample files.
    Thanks for any help.

  3. #16
    Join Date
    Nov 2004
    Location
    North Florida/South Georgia
    Posts
    984

    Ditto

    Quote Originally Posted by absrbrtek View Post
    These guys will build whatever you want. I would be willing to bet they can even adapt to the sensor that is buried in the compressor section. Therefore, you want have to take it apart & deal with that crazy vertical & horizontal gasket arrangement.
    All my leon freaked out!

  4. #17
    Join Date
    Nov 2004
    Location
    North Florida/South Georgia
    Posts
    984

    Smile Just a bad a$$ control panel

    Quote Originally Posted by can View Post
    What is MCS?
    Thats custom made for your chiller. Graphics are optional.

    Look at abs post & follow the link. If you have any questions, go to my profile & you can shoot me an e-mail. Or, call me. But, the international charges might be a little costly.
    All my leon freaked out!

  5. #18
    Quote Originally Posted by chiller mekanik View Post
    Thats custom made for your chiller. Graphics are optional.

    Look at abs post & follow the link. If you have any questions, go to my profile & you can shoot me an e-mail. Or, call me. But, the international charges might be a little costly.
    Thank you for advise. If we are go for the MCS. It have any support in Hong Kong! We are still like to use the 32XR or standred PIC III control. Normally, we will only purchase the control, actuator and SMM module for chiller using PIC I control, or purchase
    the Power Box too if the chiller using the 32SM or 32MP control. And modify the control wiring by myself. It will save most of money.
    Can

  6. #19
    Join Date
    Jul 2006
    Location
    The Great country of Texas
    Posts
    429
    Quote Originally Posted by can View Post
    Thank you for advise. If we are go for the MCS. It have any support in Hong Kong! We are still like to use the 32XR or standred PIC III control. Normally, we will only purchase the control, actuator and SMM module for chiller using PIC I control, or purchase
    the Power Box too if the chiller using the 32SM or 32MP control. And modify the control wiring by myself. It will save most of money.
    Call James Mitchell at Micro Control Systems and ask him. They sell stuff all over the world including the middle east- US 239-694-0089
    "I'm from Texas, what country are you from?"

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event