Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2002
    Location
    in a house, Appomattox, Va.
    Posts
    3,415

    new tool for tight drain fittings

    sometimes have to cut an e z trap loose, but not enough pipe left to reglue-
    http://hvac-talk.com/vbb/attachment....1&d=1313005375

    use this tool to drill out pc pipe-
    http://hvac-talk.com/vbb/attachment....1&d=1313005542

    ready to reuse.
    http://hvac-talk.com/vbb/attachment....1&d=1313005667
    Attached Images Attached Images    
    Col 3:23


    questions asked, answers received, ignorance abated

  2. #2
    Join Date
    Mar 2010
    Location
    Manassas, VA
    Posts
    61
    What's it called? Where'd you get it?

  3. #3
    Join Date
    Dec 2002
    Location
    in a house, Appomattox, Va.
    Posts
    3,415
    Its called a ram bit. picked it up at hajoca.

    they come up to 3" or so. If you had a tee in a wall for a sink, you can drill out the stub and put a new piece of pipe in w/o cutting the wall open to replace the tee.

    it costs about what an ez trap costs. I've used it once already.
    http://hvac-talk.com/vbb/attachment....1&d=1313008393
    Attached Images Attached Images  
    Col 3:23


    questions asked, answers received, ignorance abated

  4. #4
    Join Date
    Feb 2010
    Location
    Ontario Canada
    Posts
    1,341
    Good to know...I will have to pick one up.
    Never give up; Never surrender!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event