Page 2 of 2 FirstFirst 12
Results 14 to 15 of 15
  1. #14
    Join Date
    Mar 2005
    Location
    South/West of Quebec in the other part of Canada
    Posts
    2,331
    when your fan is whisling, push in the upper corners of your fan door, if that quiets the problem, call your installer

  2. #15
    Join Date
    Oct 2002
    Location
    Yo.... Here!, I'm right here..
    Posts
    6,236

    acam

    First
    Is the noise noticeable on the first floor, or just at the heater in the basement.

    If it is Just at the heater in the basement, go upstairs and stop listing to it... sorry couldn't resist..

    The install instructions are very specific on this furnace and the combustion air, on page 33.

    As I said before I would have opted for the 2 pipe with a concentric vent kit.

    There is an air disc that must be installed [ shipped loose ]and a specified length of pipe and 90* elbow.

    Second
    Absolutely move the condenser or the vent termination, flue gas can be acidic and will ruin the paint, and if you saw the pic in the movie as york_hvac pointed out is a problem.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event