Results 1 to 4 of 4
Thread: Need to Add a Wire?
-
11-10-2005, 05:22 PM #1
Regular Guest
- Join Date
- Nov 2005
- Posts
- 7
I just had a 2 stage Bryant furnace installed but the installer only put in a one stage T-stat. Probably because there was only enough wiring for a single stage. I have ordered a Honeywell 8320. I think I need the W2 wire for the 2nd stage heat?. Can I use a Debonair Add-a-Wire to solve the problem instead of installing a new wire?
-
11-10-2005, 05:32 PM #2
Professional Member
- Join Date
- Oct 2004
- Posts
- 3,399
That's what its made for.
Personally, I'd rather pull another set of wires.
-
11-10-2005, 05:34 PM #3
Professional Member
- Join Date
- Mar 2004
- Location
- Cabot, PA
- Posts
- 177
ditto unless it is a real PITA run the new wire it is your best bet
-
11-10-2005, 05:56 PM #4
Regular Guest
- Join Date
- Mar 2004
- Posts
- 1,042
Yeah.. the new cable will have several spare wires. Having those present will also allow for features you may want to add in the future- dehumidification, humidification, outside temp sensor, dual fuel, fresh air ventilation, etc. Until everything goes digital, there is going to be a lot of push for more wires as systems get more and more complicated.
Reply With Quote
