Test Questions
Results 1 to 4 of 4

Thread: Test Questions

  1. #1
    Join Date
    Oct 2005
    Location
    maryland
    Posts
    6
    Need help, I need to renew my license and I haven't been able to find answers to my review question.
    1. what is the proper temperature setting of the furnace limit control.
    2. what is the max. allowable pressure to be exerted on the inlet side of the oil pump, in pounds?
    3. what is the max pressure at the oil nozzle?
    4> what determines the firing rate of an oil burner?
    5 what is the proper temp. setting of the furnace limit control?
    Any help will be greatly appreciated.

  2. #2
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    33,811
    1 & 5 are the same, mfrs. spec
    2 ???? On the inlet side????
    3 What the mfr calls for. Oldies usually 100 psi, new ones much higher
    4. Nozzle size and oil pressure

  3. #3
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,635
    gmh--------- Need help, I need to renew my license and I haven't been able to find answers to my review question.



    If you don`t know these answers...........I DON`T SEE HOW YOU GOT YOUR LICENSE!!!!!!!!!!!!!!!!!!!!
    It`s better to be silent and thought the fool; than speak and remove all doubt.

  4. #4
    Join Date
    Jul 2002
    Location
    St Paul, Minnesota
    Posts
    3,468

    Wink

    and you always knew all of the answers to any test you ever took. Wow! Went to school with a kid like that. When his mom didn't pick out his clothes, he had some real combinations....common sense he did not have either.

    limits: most of those I see are preset at 200, is that the correct answer?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event