Results 1 to 5 of 5
  1. #1
    Senior Tech Guest
    Coming soon...to a wholesaler close to you....3 stage equipment...

  2. #2
    Join Date
    Mar 2002
    Location
    Gaylord, Michigan
    Posts
    729
    heard about that, not holding my breath. When it gets in stock at the distributor, then I will get excited.

  3. #3
    Join Date
    Feb 2004
    Posts
    2,597
    using a 2 stage stat on a ruud/rheem mod will get you three stages.

    are you talking a/c?

    if you use the ruud/rheem stat(and sensors) you will get 11 stages of heat.

    [Edited by billva on 10-26-2005 at 11:05 PM]

  4. #4
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    34,243
    Our A-S supplier made that annoucement at a recent dealer meeting. Should have seen the look on his face when I pointed out Rheem blew that away years ago

  5. #5
    Join Date
    Mar 2001
    Posts
    288

    3 Stage cooling...example--4 ton unit...instead of 2 two-ton compressors say you have a 1.5 ton stage that runs on slightly warm days/low load, a 2.5 ton compressor that runs on moderately warm days or higher cooling load...and during the hottest days highest cooling load....both compressors run. Couple that with a variable speed fan and an intelligent thermostat algorithm that's always clocking the outdoor temp....probably expensive but fun to think about

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event