Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2005
    Posts
    1
    Hi all, Brought my house a year ago and the furnace worked with no problems last winter. Tried to turn it on for the first time yesterday and the burners start up on the furnace then shuts off after 5 - 10 mins. Today it did the same thing and I notice that when the gauge (sits on top of the furnace) hits near 30 psi the burners would turn off. I have no heat now and the HVAC guy is coming tomorrow. Any advice or idea on what is wrong would be helpful so i know what to expect tomorrow. thanks

  2. #2
    Join Date
    Apr 2003
    Posts
    6,383


    Welcome to HVAC TALK.

    The best thing to do is wait for the tech to show up to diagnose your unit, as it's hard to test the equipment over the net.

    Thanks for your understanding.

    (we can't help DIY, due to site rules )

  3. #3
    Join Date
    Jul 2002
    Location
    St Paul, Minnesota
    Posts
    3,468
    30psi, your furnace is a boiler and your boiler is not a furnace. You need to pay that service guy a little extra and have him take you thru how that system operates. Worth the cost.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event