Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Feb 2005
    Location
    Richmond
    Posts
    480
    Ihave a 2.5 Ton York Heat Pump E1FD030S06 and AHU Model FA4B. Last night, it got down to 64 inside the house, so I tried the heat for the first time and seemed to be working great. When I got home today and took my dog outside (No, he does not "go" on condensors) I went over to the unit to see how it looked and there was ice on the very small copper lines inside the unit. I think these lines were comong from the distributor. Also, there was what I think was water dripping from the line that enters what I belive to be the distributor. The outside air temp was 52 degrees at the time. Is this normal?

    Thanks!

    -York_Hvac

  2. #2
    Join Date
    Oct 2005
    Location
    Fairfax, VA
    Posts
    111
    Sounds normal, but only a technician right there can check the charge. The big pipe leaving the outdoor unit should be hot when running. The unit has a defrost system to deal with ice buildup on the coil and tubing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event