Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2005
    Posts
    1
    I have a Peerless hot water boiler. The ignition is delayed by a second or two causing a buildup of gas which ignites a small boom. In the past when this has happened, I removed all the burners, cleaned them and reinstalled and this seemed to take care of the problem. This time it has not. Any other suggestions?

  2. #2
    Join Date
    Sep 2004
    Posts
    3,157
    Call your gas supplier and ask them to referr you to a contractor that knows gas appliances and how to properly repair them

  3. #3


    Welcome to HVAC TALK. However this site has rules against giving out technical advice to DIY'ers. I have attached a link below for your convenience.

    Here's something to think about though...

    When was the last time you had that unit cleaned and inspected?

    Now you have a problem with the unit. Fuel costs are skyrocketing.

    So why not call in a professional to repair the unit? While they are there they can clean and inspect your unit to insure a safe living environment for you and your loved ones. Not to mention, having an efficient running system could save you more than the cost of the service.

    What's your safety worth? I'm guessing more than the repair bill.

    Thanks for your understanding.

    (we can't help DIY, due to site rules )

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event