Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2004
    Post Likes
    In a dual fuel setup HP with gas backup, I would tend to think that a 80% furnace would be the best route to offset the high cost of the HP. which do you recommend and why, my climate is so. indiana.
    Still learning opinions welcome.

  2. #2
    Join Date
    Apr 2004
    Post Likes
    Well if you have any cooling load, you can be rest assured that your SEER will lose about a point when on a 90 versus an 80 because of the secondayr HX. And that can also affect the HSPF. If it were me, an 80+ with VS would be ideal.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.