Results 1 to 7 of 7
  1. #1
    heatseeker Guest
    bathroom vent fan was working fine and just stopped working. Seemed to short the switch, don't know why? Fan is getting corect voltage to it . but not getting 110 to 120 at the switch. Anyone know what could cause a short all the wiring is new, fan was new. ???

  2. #2
    Are you a tech or a HO?

  3. #3
    Join Date
    May 2004
    How did the testing go? Did you pass your journeyman's yet?

    Sounds like the power goes to the fan and the hot goes to the switch and comes back... check your wire connections at the fan in the handybox. Check the wirenuts to see if you are making good connections there.

  4. #4
    Sorry I didn't know who you are. Just following the rules.
    And i too hope you made Journeyman.

  5. #5
    Join Date
    May 2004
    thank you curry...

  6. #6
    Join Date
    Apr 2005
    Tampa, Florida
    If it's the usual cheap bathroom fart fan, the fan motor probably is shot, doesn't take much. BUT, since you're not sure about the wiring, best to call a tech who understands this stuff. Better safe than sorry. Electrical fires suck.

  7. #7
    Join Date
    Feb 2003
    and 120 volts is hazardous!
    harvest rainwater,make SHADE,R75/50/30= roof/wall/floor, use HVAC mastic,caulk all wall seams!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365