Need a little help here with my Vision-Pro setup? I have a 95 fue two stage variable speed furnace with a heat pump. The Vision Pro is the 3 heat 2 cool version and the outside temp probe has been installed. I had read on another thread that the VP will not work correctly with the equipment configuration I have. My HVAC guy is not familiar with the VP and I am concerned he may not set up the system right.
I'd like to set the day time temp in the winter to 68 and would like to set it back to 62 at night. Is it possible to have the furnace set to handle the morning recovery or is VP going make that choice based on the balance point and what the outside temperature probe is reading?