Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Sep 2005
    Tucson, AZ
    Hey everyone,

    As I said in another post, I ordered my system (A/S ycx036g-m)a few days ago. I have to make a decision about the thermostat. I haven't spoken to the contractor, but I was wondering, is it worth getting the VisionPro thermostat, if this system only has a two-speed blower? Could a simpler thermostat do the job? I am gone a good part of the day, and I need to program it to go off when I am not here.

    On a related note, I have an indoor/outdoor dog (an airedale, about 75 lbs.), which means that I have to leave a sliding glass door open, so he can go in and out when I am gone. Does anyone know of any attachments or any other way so that I can close the slidng glass door and yet be able to add a dog door?
    As always I greatly appreciate any input/help.

  2. #2
    Join Date
    Oct 2005
    phoenix az
    home depot used to sell dog doors that installed in sliding glass doors.

  3. #3
    Join Date
    Apr 2005
    Tampa, Florida
    VisionPRO stats come in single stage and multistage flavors, so go for it. If you're planning on using the setback, they don't come easier to program than this. I also prefer Honeywell's algorithms, especially recovery algorithms, over most of the other stats out there.

  4. #4
    Join Date
    Feb 2003
    I had a clerk who had a cat door which got removed just after the cat brought in a rattle snake!
    harvest rainwater,make SHADE,R75/50/30= roof/wall/floor, use HVAC mastic,caulk all wall seams!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event