Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2004
    Posts
    158
    Post Likes
    Just wondering---What software do you use to access network from laptop,is it Network Service Tool?What adapter do you use to go from USB to their RS485 and where do you connect to the bus?

  2. #2
    Join Date
    Jul 2005
    Posts
    72
    Post Likes
    You can connect to it with Service Tool, or Comfortview. You can wire the comm bus to a phone jack, or connect right to the 3-wire bus using a signal converter. B&B Electronics makes several models that you can order online. Most of the ones I have ordered required a serial port rather than USB.

  3. #3
    Join Date
    Sep 2004
    Posts
    158
    Post Likes
    Thanxx

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech365 Virtual Event