Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2005


    I have a york gaspack (older) Model # D1GA036N08006A.

    I appears the blower motor is set on the low output setting, as it only is slightly detectable at the regesters inside the house. (I have cleaned both coils and changed all return filters and still very little output on supply registers. Can the fan motor be set to medium or high output manually, by changing leads on the motor? Does the AC unit automatically monitor and make these changes? How can I increase the output to my supply side registers? Thanks for your help!!!


  2. #2
    Join Date
    Feb 2003
    South Carolina
    Call a pro to check it out!

  3. #3
    Join Date
    Jan 2004
    Lancaster PA
    The evap coil may not be as clean as you think.
    What size is tyhe return and supply.

    The motor should be a multi speed, but that may not be the problem, how long have yoou had this unit, did you recently but the house.
    Contractor locator map


    How many times must one fix something before it is fixed?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event