Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2005
    Post Likes
    I am planning on installing a 16 Seer Amana Heat Pump (RTG48C2C) which has a dual stage compressor. I am also going to install a 96%, 2 stage, variable speed, Amana Condensing Furnace (AMV90905DXA). I want the ability to see when I'm running both stages on my compressor and also adjust the change over temperature from heat pump to gas heat. I also want the ability to play around with setbacks. Which thermostat do you recommend I go with??

  2. #2
    Join Date
    Mar 2003
    Post Likes
    then you need to go with the carrier infinity system. the infinity stat lets you do and see what you want.

  3. #3
    Join Date
    Aug 2002
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Post Likes
    Infinity but it won't run the Amana.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.