hello all

Just happen to be looking through a Tracker V11 book and noticed that Trane has LonMark profiles for some of there controllers as follows:

New VariTrac CCP = Custom Profile (82.06)
Tracer MP503 I/O Module = (82.08)
ZN 517 Unitary Controller = (85.00)

Has anyone tried using LonMaker to config. these devices?

Trane also notes that there Comm5 link is an FTT-10A network. How do they get away with just a 105 Ohm termination resistor?

Something tells me no matter what you will need Rover tool to configure these modules.

Core