Results 1 to 1 of 1
Thread: iLON600 reset
06-24-2011, 11:01 PM #1
I want to rest an iLON600, when I power it up the TX and RX led are steady on, when I press the service pin and the service led don't blink.
I tried to reset with the reset button + service pin button procedure but the leds don't flash as the manual says.
I also tried to enter by the console port but no success.
I cannot remeber the IP of the unit to enter by the TCP/IP port.
how i can fix this? or is dead?