Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2009
    Location
    Virginia
    Posts
    16

    JCI CCT programming/training

    I have just opened up the CCT software and quickly decided to look for help. I have been programing DX9100 and using HVACPRO. But this CCT likes foreign no ladder logic etc. Can someone suggest some training/ reference material I could get. JCI class is not until September if they get enough students?

    Thanks
    David

  2. #2
    Join Date
    Mar 2007
    Location
    State of Confusion
    Posts
    1,210
    Good Luck with that. Most JCI don't know much about that system. Atleast, here in Pa. Its a big secret..

  3. #3
    Join Date
    Jan 2001
    Location
    Pamnyra VA.
    Posts
    710
    Look under the section Controls , they might help you out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event