the last few weeks ive been using the accu trak vpe more
ihan usual & having very good results. i found one in a line
set about 2 inches behind the stucco & when we opened the
wall the leak was within a couple inches of where we were hearing
it the best. this leak was about 3 lb. a year on a 15 # charge
system & had been leaking about 10 years.
I recently bought a Bacharach Informant 2. You should check it out! I am very happy with it. It found a 410a leak that I had been looking for that 2 other techs from different companies had searched for before me. As far as Field Piece goes... It got its name because the Piece of Sh*t falls apart inf the field! Don't buy them... You'll regret it very soon!
There's my .02
how did he get here he has 6 posts and is a regular guest. I thought this area was off limits to regular guests.
All Pro Areas should be closed to the general public. They do not use are tools. All we need is a tool with a bad review and the customer see us pull it out of our bag to use and BAM, he has formed an opinion. I vote to close it off to uneducated eyes. The site is growing and needs to be tweaked a bit.
As you can tell, I'm a Fluke guy but I use Tif ZX-1 detectors. I'll gladly put my ZX-1 up against the FP finding a One bubble leak. The Robinair might be OK but their Customer Service is POOR.
You FP guys can't take any Joking.
Have to run...
I just replaced my ZX-1 with the Robinair. The ZX-1 was pathetic at leaks and spent most of its time being shipped to the mfg for repair. I am not so sure of the Robinair, it is new, and I hope for the best.