Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2014
    Location
    hampton roads va
    Posts
    80

    YT optiview control issues.

    Recently I have just joined the forum. I posted earlier about a harmonic issue with same chiller. The vsd on this machine originally failed. I then replaced the vsd to find that the logic filter board also took a hit and was bad. Now 1 week later after chiller was back online. My optiview control panel keeps coming in and out. It will load up go through all the pre steps and when it goes to load the main screen it goes completely black. Im thinking the power supply module may be bad. Any help would be appreciated.

  2. #2
    Join Date
    Aug 2006
    Location
    Mixing oil and fire with a big spoon.
    Posts
    4,488
    replace the power wiring harness from the power supply to the microboard and your problem will probably be solved...it is an undocumented issue. also, get the 12" wiring harness...not the 8" wiring harness. yes, they make 2 lengths. no, i don't know why.
    "If you pull one more stunt like you just pulled with Tommy, you won't have to get on a plane because I will personally kick your ass from here to Korea!" - Best of the Best

  3. #3
    Join Date
    Jul 2014
    Location
    hampton roads va
    Posts
    80
    Thanks Jayguy for the help I will try that. I appreciate the help sir.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event