Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2004
    Location
    Atoka, TN
    Posts
    42

    Help on 19XL5758493CR

    no Benshaw starter, I get a Low Line Voltage Dropout after 1 hour of operation. Cooling normal and have to do a manual restart. I have checked line voltage and low pressure switch as OEM stated, checked for loose wiring, all are tight. Any suggestions? Thanks in advance for any help, i have been fighting this problem all weekend and I am getting nowhere.

  2. #2
    Join Date
    Dec 2010
    Location
    georgia
    Posts
    78
    I know you have probably solved this by now. As strange as it may seem I
    have seen loose solder connections on 6-pax relay board cause this and other
    similar prolems.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event