Results 1 to 2 of 2
  1. 06-09-2011, 10:06 PM #1
    Norriski Tech
    Norriski Tech is offline Professional Member
    Join Date
    Jul 2009
    Location
    Wa
    Posts
    89

    Johnson fx60 with webs workbench

    Forgive me I am new with tridium. I have done a few webs jobs. My company is going to be removing a n30 and replacing with a fx60. Am I correct if the fx60 is licensed open I am able to engineer with Honeywell workbench? The communication trunks will be existing N2 devices and a new mstp bus. Or has anyone installed a web 600 with a third party N2 driver with success. I have my reasons for not installing fx workbench at this time. Inner office b.s.! Any input would be greatly appreciated.
    Reply With Quote Reply With Quote
  2. 06-10-2011, 06:16 AM #2
    Chris_Worthington's Avatar
    Chris_Worthington
    Chris_Worthington is offline Controls Committee & Global Moderator
    Join Date
    Jul 2007
    Location
    Mount Airy, MD
    Posts
    7,102
    You will be good with the FX-60 and the HW WB, But not the other way around due to a brand check.

    Obviously your gonna have a snatch a few modules out of the 60 to work the N2 though.

    Controls Forum Rules Site Rules Tridium
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules