Left over from basement project. Some of the pieces have a few screw holes where they connected together. All of it is in good condition but were either extra's or installed and later determined to be excess, thus no longer needed. Email me at address listed on my profile

45.00 for everything

2 Inside take off 6''
2 Reducer 6'' to 5'' no crimp
1 6 1/2 X 6 Plenum take off has (dried mastic on it)
1 oval 90 6''
2 drawband 4''
4 90 degree adjustable 6''
1 angled boot stack 12x3 6''
1 round to oval 90 degree 6''
1 10 X8 rectangular duct cap
1 oval stack head 6 x 10 6''
1 round stack head 6 x10 6''
1 Oval 90 degree boot 6''
3 flex connectors 6''
1 oval flex connector 6''
1 3'' to 4'' reducer round
1 tabed 6'' take off 2'' in rise (has dried mastic on it)
2 crimped starting collars


Round pipe 6''
2 round pipe 5' in length
1 round pipe 1' 10'' in length

Round pipe 5''
1 round 3' 3'' in length
1 round 2' 6'' in length
1 round 2' 10'' in length

Oval pipe 6''
1 2' 7'' feet in length
1 11'' in length

Various slips and drives in varying lengths
Duct hangers and clips/brackets