Results 1 to 11 of 11
Thread: 2 ton Duel Fuel Pkg
-
06-03-2011, 08:26 PM #1
Regular Guest
- Join Date
- Aug 2008
- Posts
- 212
2 ton Duel Fuel Pkg
Removed Heil PGAA Gas Pack and installed a new Rheem 2 Ton 14 SEER Duel Fuel Pkg Unit. Sweet little Change Out. http://hvac-talk.com/vbb/attachment....1&d=1307147034
-
06-03-2011, 11:21 PM #2
Professional Member
- Join Date
- Oct 2007
- Location
- Milwaukee,WI
- Posts
- 1,047
No trap?
___________________________
-supertek65Chicago is an indian word for stinky!!!!!!
-
06-04-2011, 06:27 AM #3
Global Moderator
- Join Date
- May 2000
- Location
- Indianapolis, IN, USA
- Posts
- 31,522
Internal trap.
-
06-05-2011, 01:30 PM #4
Professional Member
- Join Date
- Oct 2004
- Posts
- 193
Had an inspector say the same thing to me on the exact same looking install....
I turned the 90deg elbow up at the end of the drain line to shut him up
It's all about heat transfer...
-
06-05-2011, 04:54 PM #5
Global Moderator
- Join Date
- May 2000
- Location
- Indianapolis, IN, USA
- Posts
- 31,522
Easily seen if looking down through the fan grille but you gotta keep them happy
-
06-05-2011, 05:03 PM #6
Professional Member*
- Join Date
- Jan 2009
- Location
- Fairfield county Connecticuit
- Posts
- 775
Too close to gas meter and regulator?
-
06-05-2011, 07:19 PM #7
Professional Member*
- Join Date
- Dec 2005
- Location
- Cincinnati, Oh
- Posts
- 3,933
Looks like 3' to me.
Originally Posted by Danimal535
"Better tell the sandman to stay away, because we're gonna be workin on this one all night."
"Dude, you need more than 2 wires to a condenser to run a 2 stage heatpump."
"Just get it done son."
Dad adjusted
-
06-15-2011, 01:57 PM #8
New Guest
- Join Date
- Jun 2011
- Location
- Rome, Georgia
- Posts
- 4
Nice looking job. Having any problems with the Rheem equipment?
-
06-15-2011, 02:08 PM #9
Regular Guest
- Join Date
- Jun 2009
- Location
- Albuquerque NM
- Posts
- 2,443
No insulation on the ducts?
-
06-15-2011, 02:13 PM #10
New Guest
- Join Date
- Jun 2011
- Location
- Rome, Georgia
- Posts
- 4
No insulation on the ducts?
Looks like a rainshield to me.
-
06-17-2011, 10:21 AM #11
Regular Guest
- Join Date
- Aug 2008
- Posts
- 212
To Buck Wheat: I have had very few call backs on Rheem Equipment. Mostly the same TXV and X13 Motor issues that all Manufactures had. I have had very good luck so far.
As far as Duct Insulation, All new duct was insulated external with 2" Fiberglass wrap and sealed vapor barrier. All existing duct was 1" Duct Liner.
The Sheet Metal between the unit and wall is simply there to keep the weather off of the duct connections and make it look good.
Reply With Quote
