micron gauge

[qctech2410]

anybody know a good micron gauge to purchase? something that will last.

[joeyd]

anybody know a good micron gauge to purchase? something that will last.

Hi, qctech.

I am the manufacturer of AccuTools products. If you wish, please take a look at the BluVac gauge on our site:

http://www.accutools.com/index.php?p...subpage=bluvac

The BluVac has been well received by techs. It can be purchased at:

http://www.trutechtools.com/BluVac-D...ge_p_1641.html.

I can answer any questions you may have about the product.

[Saturated Suter]

Almost every tech I know originally purchased the Yellow Jacket SuperEvac LCD Vacuum Gauge or purchased it after some other brand failed. The cost is around $250.00 but the reliability is top notch. The brass connector after years of use will have to be replaced at the cost of $15.

[basshound71]

Almost every tech I know originally purchased the Yellow Jacket SuperEvac LCD Vacuum Gauge or purchased it after some other brand failed. The cost is around $250.00 but the reliability is top notch. The brass connector after years of use will have to be replaced at the cost of $15.

[hvacpope]

http://www.thermalengineeringcompany...p=50003&pid=23

[jimj]

Hi, qctech.

I am the manufacturer of AccuTools products. If you wish, please take a look at the BluVac gauge on our site:

http://www.accutools.com/index.php?p...subpage=bluvac

The BluVac has been well received by techs. It can be purchased at:

http://www.trutechtools.com/BluVac-D...ge_p_1641.html.

I can answer any questions you may have about the product.

Its on my list of must have! I do have to say thou that my Yellow Jacket SuperEvac LCD Vacuum Gauge is great.

[danielworkerbee]

Thermal Eng. analog w/ batteries, been berry berry goooood to me.
luck dan