Results 1 to 3 of 3
Thread: Bent fan blades
05-21-2011, 04:38 PM #1New Guest
- Join Date
- May 2011
Bent fan blades
Returned from vacation to find A/C not working. This is a new home only three years old. Service tech came from company who did the install. He was up in the attic for a while, when he came down he had the blower fan with him. It was all bent out of shape, blades were bent and the fan was out of round. How does this happen.
A/C is a York residential unit.
05-21-2011, 04:57 PM #2
Could just be a bad fan from manufacturing, or I have seen where if there is to high of static on the blower it will cause them to break.
05-21-2011, 10:19 PM #3Professional Member*
- Join Date
- Dec 2002
- SouthEast NC ICW & Piedmont Foothills
New Member Introduction and Site Rules Just Joined? Be sure to pop in here and introduce yourself Register Here DO NOT POST SITE QUESTIONS HERE!!
don't know why they put that banner up there but.........
something got caught in it or bad batch of blower wheels from mfg
LAU went thru that a few years backIt`s better to be silent and thought the fool; than speak and remove all doubt.