Results 1 to 3 of 3

Thread: Bent fan blades

Hybrid View

  1. #1

    Bent fan blades

    Returned from vacation to find A/C not working. This is a new home only three years old. Service tech came from company who did the install. He was up in the attic for a while, when he came down he had the blower fan with him. It was all bent out of shape, blades were bent and the fan was out of round. How does this happen.
    A/C is a York residential unit.

    Thanks.

    Chuck

  2. #2
    Join Date
    Aug 2009
    Location
    Beatrice, NE
    Posts
    2,068
    Could just be a bad fan from manufacturing, or I have seen where if there is to high of static on the blower it will cause them to break.

  3. #3
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,635
    psssstttttttt


    New Member Introduction and Site Rules Just Joined? Be sure to pop in here and introduce yourself Register Here DO NOT POST SITE QUESTIONS HERE!!


    don't know why they put that banner up there but.........



    something got caught in it or bad batch of blower wheels from mfg

    LAU went thru that a few years back
    It`s better to be silent and thought the fool; than speak and remove all doubt.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event