I have a large project at Fort Leonard Wood involving Honeywell T7350A’s and T7350H’s. I have configured these with the T-Stat Spec software I downloaded off Honeywell’s website. My question is, when you are configuring the schedules, say if you have a building occupied Mon-Fri 0600-1730 with Sat and Sun un-occupied, do I leave Sat and Sun “un-configured”? Does the un-configured setting on those days make the space run off the un-occupied setpoints or is there a way to make those two days un-occupied all day without making them occupied for one minute a day then returning to un-occupied. I just don’t want the stat to go through optimal start/stop for 3 hours previous to a one minute occupied period during weekend days.
This is a very large project involving hundreds of buildings, sold to the Gov't to conserve energy, so as much as I can conserve the better for them and me!