+ Reply to Thread
Results 1 to 10 of 10

Thread: Fog in the walk-in freezer

  1. #1
    Join Date
    Feb 2011
    Location
    Indianapolis, IN
    Posts
    34
    Post Likes

    Fog in the walk-in freezer

    Ok.. First post I have done so here it is.
    I have a walk-in freezer that has frost building up ice on the roof of the box. Also it is blowing fog all threw the box. The box stays @ -15 Degrees but, I cant figure out where the fog is coming from. The door has a new door seal on it and it has a small gap in the corner of the frame. Both door frame heaters are working but, that is the only air leak I see...
    I have 4 stages of defrost for 45 min. each also. Looking for some opinons and thoughts
    Thanks

  2. #2
    Join Date
    Sep 2003
    Location
    Western PA
    Posts
    1,753
    Post Likes
    Could be staying in defrost too long.

  3. #3
    Join Date
    Jan 2008
    Location
    Lake Worth, FL
    Posts
    111
    Post Likes
    1 air leak is 1 too many. It brings in warm, moist air and wastes energy. 45 minutes on defrost is too long. Warms up too much and then when it kicks on it refreezes on the ceiling. The defrost timer is a backup if the defrost termination sensor goes bad. Check that out on the evaporator coil and make sure it has a connection to the X terminal on the defrost timer.

  4. #4
    Join Date
    Apr 2011
    Location
    Yooper-ville, Michigan
    Posts
    22
    Post Likes
    What's your evaporator TD? Sounds like hoarfrost to me.



    Pairman~ I'm from Jackson, Michigan. I used to work for Apsen Heating and Cooling. I had an internship there last summer.

  5. #5
    Join Date
    Jul 2002
    Location
    NY
    Posts
    1,887
    Post Likes
    Sounds like an air leak but I would also check the fan delay.
    Not what it use to be

  6. #6
    Join Date
    Dec 2010
    Location
    new jersey
    Posts
    381
    Post Likes
    Here's a great pdf on iced up evaps caused by fan/delay/term. stat def.problems....

  7. #7
    Join Date
    May 2000
    Location
    Monmouth Junction-NJ-USA
    Posts
    6,125
    Post Likes
    All the above and make sure the condensate line has a trap on it. (Outside the freezer)
    If you really know how it works, you have an execellent chance of fixin' er up!

    Tomorrow is promised to no one...

  8. #8
    Join Date
    Feb 2011
    Location
    Indianapolis, IN
    Posts
    34
    Post Likes
    Thread Starter
    Thanks for the PFD it is good info Attached Files Evap_Icing_HTPG_2010-01-25.pdf (927
    WHat is the best way to adjust a door gasket ?? I already have a new on in place but it is alowing alot of air threw the door jamb?

  9. #9
    Join Date
    Aug 2006
    Posts
    3,385
    Post Likes
    Quote Originally Posted by fool4school View Post
    Thanks for the PFD it is good info Attached Files Evap_Icing_HTPG_2010-01-25.pdf (927
    WHat is the best way to adjust a door gasket ?? I already have a new on in place but it is alowing alot of air threw the door jamb?
    A Dollar bill, but it works better if you use a $20 spot.
    FEN

  10. #10
    Join Date
    Jul 2010
    Location
    Edmonton
    Posts
    93
    Post Likes
    Quote Originally Posted by rayr View Post
    All the above and make sure the condensate line has a trap on it. (Outside the freezer)
    My bet if you can't see a gap.

    Otherwise, grab your caulk and get your fingers working.

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •