Ultimate Propane Blend

[jjrr007]

Has anyone tried the Ultimate Propane Blend? It was reviewed by Dr Zarkloff:

http://m.youtube.com/index?desktop_u...?v=y-RnjI03Khw

He gave it a positve review. It is used for brazing and soldering.

[jjrr007]

The link I previously posted was for mobile phones/devices. The link below is for regular computers:



The link above is Dr Zarloff's review on the product. I wanted to please ask your opinion.

[gravity]

Dr. Zarloff is not someone u should by learning from. being said, u need to try this stuff on your own and see how your skills work with it

[jmac00]

R-E-A-L-L-Y?

watch the video and start the clock at 2:12, it took OVER two minutes to heat and solder a ⅜ copper swage.

I wonder how long it would take to heat a ¾" pipe.

can you imagine how much heat would be needed near a service valve? Kiss that valve good-by

I think I would take the time to go get my Oxy-Acetylene tanks filled

(Not for nothing, but if I were a marketing person for DiversaTech, I would ask that guy to NOT wear my hat while making "educational video's")

[Tiger93rsl]

That guy is such a dork, I've been doing that for years with my Mapp gas torch.

[jjrr007]

Is the MAPP Gas torch similar to this product (in a can, same gas, etc)?

[itsiceman]

Is the MAPP Gas torch similar to this product (in a can, same gas, etc)?

MAPP would be hotter that that example he showed.
I don't even think he finished the single swage and the tape was stopped a few times.
How could it possibly work on 3/4" and why would you ever light a torch in the cab of your truck

That torch and gas looks like a fail to me

[jmac00]

MAPP would be hotter that that example he showed.
I don't even think he finished the single swage and the tape was stopped a few times.
How could it possibly work on 3/4" and why would you ever light a torch in the cab of your truck

That torch and gas looks like a fail to me

ya, complete and total FAIL

It might be good for lighting the BBQ though

[jjrr007]

wonder why he endorsed it

[jjrr007]

If MAPP is hotter, it sounds like a good back up for the regular Aceyletan & Oxygen tank torches. I agree Dr. Z should not have tested the "can torch" in his car

[jmac00]

If MAPP is hotter, it sounds like a good back up for the regular Aceyletan & Oxygen tank torches. I agree Dr. Z should not have tested the "can torch" in his car

now, now. I use my Butane mini-torch to light my cigars in the truck

come to think of it, Mr Z's torch may make a good lighter

[VTP99]

Mapp is no longer Mapp.

[itsiceman]

now, now. I use my Butane mini-torch to light my cigars in the truck

come to think of it, Mr Z's torch may make a good lighter

Bet that torch could light the Wacky Tobacky too

I might use that thing to light a real torch