Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2004
    Location
    Wpg Mb Canada.
    Posts
    338
    so this is how i normally wire them.
    black wire.. transformer gets powered after limit
    black and yellow. to L1
    white.. neutrals
    brown N/C.. removed
    red.. to hot side of blower.

    now when there is a flue damper involved.. i would be lost. if someone could offer me help it would be nice.
    gahh

  2. #2
    Join Date
    Nov 2001
    Location
    east kansas
    Posts
    8,035
    What are you working on?

  3. #3
    Join Date
    Oct 2002
    Posts
    970
    Automatic flue dampers are pretty scary. Even with a spill switch and an end switch, I still wouldn't sleep aa wink.


    I work with the Chiller Whisperer...

  4. #4
    Join Date
    Nov 2001
    Location
    east kansas
    Posts
    8,035
    Scary yea. If it is a furnce with a flue damper, probally needs to be inspected. Might be rather old.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event