i've got a carrier 38byc048310 with a bad air handler motor. Its one of those ge ecm motors. The ecm module blew on it and ive spotted some dirt cheap brand new complete ecm motors
I was wondering if the pinouts on the 16 pin harnesses are the same on all these motors. I know its a longshot but thought it
was worth a shot.
Just in case I can't find the correct motor is there a motor
retrofit kit for carriers?
Also, I was wondering if its possible to test the motors
without using the tech-mate tester just in case I bought one
as a backup and wanted to see if they sold me a good motor.
[Edited by greghassen on 08-15-2005 at 03:21 AM]
The moduals are programed different from 1 brand to the next.
So I doubt they will work.
Every brand and every model within the same brand will have a different program.
to be more specific every model number has a different program. I wouldnt touch e-bayed ecm motors with a 10 foot pole.