Infinity Smart Sensors DASH?????

[heatpumpguru]

I am redoing my HVAC system and going 38ydb060 with 58mvp120. I really do not want to go with Arzel if these Smart sensors work. I just need to sense the temp and not turn it up or down.Arzel does not have an Infinity set up yet anyway and all ductwork mains are boxed in. I can get to runouts via drop part of ceiling.Thanks John

[fl1]

Infinity Zoning will do great.Smart senors are like a stat for each zone,but can only be adusted and program from the main stat/controller.

You can buy Smart stats to replace the sensors,if you want/need an adjustable control in each zone.

The Infinity takes complete control of the fans and dampers to optimize keeping each zone at setpoint,works really well!!!

[dash]

How many zones and by runouts ,do you mean every branch will need a damper?

Smart sensors are as described above.They mount on the wall ,like at stat,4 wires needed.

[heatpumpguru]

Dash 18 runout dampers,would be needed.I cannot put in Carrier zone system because I am not ripping out my main trunks(Nice finshed drywall sofftt). And do not want that many damper motors on each feed.