Duct sizes for 60,000 BTU
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2005
    Location
    Central Illinois
    Posts
    27
    I would much appreciate it if somebody could give me a rough sq" start size for the return & supply of a 60,000 output BTU Yok direct vent furnace. Model# P2UDD10N05701C Serial# ELCMS15607. 2 1/2 ton blower 1,000 cfm. It's about 10 years old. Most of my experiance is commercial. & I'm presently exhausted - to many hours - to much driving.
    This furnace supplies a 1,000 sq ft. first floor & 1,000 sq. ft. basement 95% below grade.


    It's a family thing.
    Thank you very much

    [Edited by clangmiester on 08-04-2005 at 04:32 PM]

  2. #2
    Join Date
    May 2005
    Location
    Central Illinois
    Posts
    27
    It's a 2.5 ton with a 1000 cfm blower

  3. #3
    Join Date
    Aug 2002
    Location
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Posts
    18,836
    Best to post this in the Pros section,so the answers aren't in the public section.

  4. #4
    Join Date
    May 2005
    Location
    Central Illinois
    Posts
    27
    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event