Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2005


    I live in a 3 story townhome where each floor has it's own zone. I've noticed of the past couple of nights that the HVAC ran all night and was trying to cool the 2nd floor but our vents were only blowing about 10%. A couple of things I tried: #1 I reset the board by turning it off and then back on. #2 I turned off the thermostats for the 3rd/1st floor and then turned on the 2nd floor from Auto to On.

    Air volume did not improve.

    I'm thinking the damper for the 2nd floor has gone bad (5yr old system), but the board gives each damper a green light (does that mean it's open or working properly?).

    We've had some very hot days in Atlanta lately.

    Thanks in advance.

  2. #2
    Join Date
    May 2000
    Indianapolis, IN, USA
    Damper could have stuck mostly shut. Only way to know is pull it out. LED won't tell you.

  3. #3
    Join Date
    Jul 2005
    Thank you for the quick reply !!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365