Originally Posted by
Froz'ninWpg
Hi everyone, I have a site with mid-90's Andover controls system consisting of 8 LCX800 style controllers. There is a supervory a controller which my customer uses hyperterminal to access. I did not get the numbers off of it.
The question is did Andover have a default administrator password that was built in? My customer only has a basic access password that allows access to view a few alarms and temps. They need to be able to adjust soem setpoints to accomodate the seasonal changes. It is of course a school and this system has not been serviced in quite some time.
There is no info on site and I am hoping to gain the ability to adjust these setpoints and limp them through until an upgrade begins before the next school year.
Thanks for the help.