Results 1 to 3 of 3

Thread: jtm

  1. #1

    jtm

    I have a goodman air handler. When my t-stat call for cooling my blower will come on but my condesing unit would not turn on. I also notice my exhaust fan in the furnace come on at the time too. I do have 24v supply to the board but when I check red to ground at the board with out t-stat connecting to the board my meter only read 15v and green to ground i got 11v. After replacing the board I got the same out put voltage. What seem to be the problem?

  2. #2
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,594
    Sorry, this is not a DIY site. Might want to call a tech before you invest more money in parts that are not the problem.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  3. #3
    Join Date
    Nov 2010
    Location
    Andover Kansas
    Posts
    2,115
    Welcome to the site. Better call a tech...it will prove to be cheaper than throwing parts at it.

    Good luck
    .


    The statement below is my signature and just my overall feeling towards our industry and does not necessarily pertain to you nor this thread.


    There really isn't a legitimate excuse for not doing the job correctly!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event