Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2004
    Location
    s.east michigan
    Posts
    48

    Hmm

    I have a oL reading on my fluke meter in the ohms setting between common and start winding on a single phase compressor. Does this mean possibly the overload is open or is the compressor toast.

  2. #2
    Join Date
    Jun 2003
    Location
    Florida
    Posts
    9,548
    If you're a service tech you should sign up and post this in the PRO section. There you can learn how to ohm out a compressor. I won't tell you here because I'll have a HO sticking his meter on a live circuit....
    If everything was always done "by the book"....the book would never change.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event