thermostat wiring
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2004
    Posts
    65
    I have noticed that on quite a few thermostats that there has been second stage cooling sometimes is using the blue wire and sometimes an orange wire and the same goes for second stage heat.Talked to a few techs and no consensus on which to use.Am I alone in this problem or is this alsosomething you guys have encountered?Thanks

  2. #2
    Join Date
    Jun 2003
    Location
    Florida
    Posts
    9,548
    Colors don't matter,it's how the unit's wired up. If you go by the normal color codes, blue is common, but can also be used for the reversing valve energised in heat.Should post this in the pro section.....
    If everything was always done "by the book"....the book would never change.

  3. #3
    color does not matter lots techs wire with different color so to mess some techs and indivudals up so they maybe get call back for them

  4. #4
    Join Date
    Aug 2002
    Posts
    490
    if you go over to the blower box pop off the cover and look at how it is wired to the board, then thats how you wire it to the t-stat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event