Results 1 to 5 of 5
04-12-2011, 02:52 PM #1New Guest
- Join Date
- Apr 2011
How to set up a condisate drain on a Gibson furnace
Im in a apartment building and installing a condesent drain, because I couldent go out the top of the unit which is factory with this unit I turned the purge sideways and the book says if you do that than the original drain is useless and you have to run a different way, the drain is going out the left side of the unit below the blower, how is the best way to run the drain, as far as I understand comeing off the purge I have to run a T on the 3in PVC drain then im kinda lost from there. The book dosent do a very good job explaining the best way to run the drain with the purge horizontal out the left side
04-12-2011, 03:55 PM #2
04-12-2011, 04:20 PM #3
Your install manual will show you all acceptable routings for your unit. If you don't see it, don't do it.
04-12-2011, 07:50 PM #4
call a pro. Gas appliances aren't something to mess around with."Better tell the sandman to stay away, because we're gonna be workin on this one all night."
"Dude, you need more than 2 wires to a condenser to run a 2 stage heatpump."
"Just get it done son."
04-12-2011, 11:38 PM #5
Last time look at a gibson book (last week) It shows how If you are kinda lost. then you need to put your tools away and call a pro. If it not done right you can hurt someone or do damage to the unit.
CALL A PRO.