1) I direct connect to the N30 with Windows Dial Up mode
2) I am able to connect perfectly it shows that I am connected
3) I already have Project Builder running in Loader mode
4)"Upload" and "Download objects" is grayed out on the
5) I click on HVAC Pro Pass thru mode Site manager runs
6) 5 minutes ,Nothing happens
I try to run regular HVAC Pro ,am told that Site
manager is running HVAC PRO pass thru mode
7) How long does this take
8) I know I am missing something THE connection status
window on the Taskbar shows there are no bytes being
recieved and no bytes sent, but I am connected
I selected edit site
I am connected with a null modem cable
I selected N30 object to edit
UPload and Download objects is still grayed out
Correct device name specified for the N30?
Yes I typed in the exact name of the N30
Case and Space sensitive
There is only one N30 on the site
That's all I've got dude, sorry.
I'll dig out my class materials later if I get a moment though.
First go into network profiles and check setup...
unit should auto connect did you build the site??
Check your passwords and make sure thay are right..
more info i'll try to help
also check your com settings..i.e. 9600 or 56000
I do not think I am performing the
proper sequence of operations with
I open Project Builder Then I open site master
I have Project builder in loader window
I think I am missing something here
I dug out my N30 stuff, I have 10 pages on the procedure for up/downloading objects. I'll scan and send them your way if you'll give me a good address.
Thank you very much
This site has been so educational
espaecially with all the Johnson info
I've been slammed at work, give me a day or two.
We have been having 90 Degree Plus weather
Everyone is very busy
Please take your time I appreciate it very much