It must be specifcally made for mobile home,and it will be helpful if the dimensions of the cabnet are close to being identical.
Have a need to install new downflow equipment in a mobile home. It presently has a downflow three-ton gas furnace, matching coil with three-ton condensing unit. All Coleman.
Anybody know of any problems or reasons I cannot replace the Coleman equipment with another brand, say Goodman or whatever?
Looking for a "heads-up" before I order the equipment. Project in So. Calif.
Thanx,
Tom
It must be specifcally made for mobile home,and it will be helpful if the dimensions of the cabnet are close to being identical.
1. Before installing the new furnace, clean the surface of the cooling real good and make sure it is sealed so all the air goes THRU it instead of bypassing some AROUND it thru cracks.
2. Now is the time to consider a stronger blower/motor in the selection of your new furnace if airflow has been minimal in your mobile home.
Must be certified for a trailer installation!
The only companies I'm aware of that are manufacturing products for trailers are...
Coleman, Miller, and Thermopride.
(and of coarse the sister names to these)
go with a package unit
'Go with a packaged unit'
ME: In most cases, they are suject to bugs getting into the Contactor , pilot , etc.. ; If i had a Mobile Home, id stick with a split system. (id most likely put in a horizontal 90 plus 2-pipe furnace in the crawl with 14 seer a/c unit)
Learn how to use the quote feature, leave the ME routine over at usenet
The way we build has a greater impact on our comfort, energy consumption and IAQ than any HVAC system we install.
http://www.ductstrap.com/
I suggested a package unit because most mobile home blowers are very loud.
.
Package unit is likely to have better air flow as well.Originally posted by prodiyer
I suggested a package unit because most mobile home blowers are very loud.
Bingo!Originally posted by prodiyer
go with a package unit
He's not wanted over there either... LOLOriginally posted by Carnak
Learn how to use the quote feature, leave the ME routine over at usenet
'Learn how to use the quote feature, leave the ME routine over at usenet
'
ME: This is an instance when you SHOULD be more tolerant . I shall reply to a post by the method that suits my choice ; if it doesnt meet with your approval, dont respond to me. Here is what the Moderator encourages people in here to do...give it a try and you wont appear so unfriendly, rude, and jerkish :
"Thank you for participating in HVAC-Talk! Together, with your help, we are building a fun place to learn and to just hang-out with friends!
Thanks again
BC1 "
Must be certified for a trailer is correct but there are other brands with sealed combustion that now are certified for mobile homes including Trane and York. The problem is unless you are going to tear out all the ducts and start over the blowers will not handle the static pressure required by trailer home duct systems. If you are going to use the existing ductwork choose the brands that Jultzya suggested and do not try any other brand unless you like headaches.Originally posted by jultzya
Must be certified for a trailer installation!
The only companies I'm aware of that are manufacturing products for trailers are...
Coleman, Miller, and Thermopride.
(and of coarse the sister names to these)
Somewhere I read that Goodman package unit is certified for a mobile installation. I could be wrong but it would be worth your while to look it up on their web site on the the front of one of their installation manuals.
(reached over an opened a Goodman Products Catalog) Page 26 fro a PHKJ Series package unit and says "..and is approved for manufactured or modular homes."
Looks like most if not all their residential package units have the same wording.
"The American Republic will endure until the day Congress discovers it can bribe the public with the public's own money.
- Alexis de Toqueville, 1835
He's not wanted over there either... LOL
ME:
Originally posted by jultzya
He's not wanted over there either... LOLOriginally posted by Carnak
Learn how to use the quote feature, leave the ME routine over at usenet
The way we build has a greater impact on our comfort, energy consumption and IAQ than any HVAC system we install.
http://www.ductstrap.com/