Results 1 to 10 of 10
Thread: A/C
-
07-03-2005, 02:03 AM #1
Regular Guest
- Join Date
- May 2004
- Posts
- 23
Got a problem have a 2ton A/C that froze up I put it in when the weather was cold and my pressures we at like 40 suction and 150. So when it froze up today I ran the fan to melt the ice and then did a superheat and from the chart for a 75 degree outside and a 59 degree wet bulb the superheat should be 16.5 and I was reading 45 so I added some freon my presure then started to raise and my superheat started to go down then all of a sudden the suction presure droped and the superheat rose. and when I put my thermoter inside I was getting teh same temp going out as coming in. Any Ideas what is up.
-
07-03-2005, 02:27 AM #2
Professional Member*
- Join Date
- Mar 2002
- Location
- Concord, CA
- Posts
- 2,628
-
07-03-2005, 02:37 AM #3
Regular Guest
- Join Date
- May 2004
- Posts
- 23
subcooling -1 if debree is problem should I pump the freon al back check the orifice and add a dryer?
-
07-03-2005, 02:54 AM #4
Professional Member*
- Join Date
- Mar 2002
- Location
- Concord, CA
- Posts
- 2,628
IF there is debris then of course. But you already knew that... I hope.
-
07-03-2005, 07:50 AM #5
Remove old filter drier, and install new, after removing debree.
-
07-03-2005, 10:08 PM #6
Regular Guest
- Join Date
- May 2004
- Posts
- 23
knew would hav to remove debree but did not kno if I wuold need to add a dryer.
-
07-04-2005, 12:47 AM #7
Professional Member
- Join Date
- Dec 2002
- Posts
- 174
its a good...
...practice to change out the filter/drier any time you open the system. If you have debris in the system then the FILTER/drier also has debris.
-
07-04-2005, 12:53 AM #8
Professional Member
- Join Date
- Sep 2002
- Location
- South Dakota
- Posts
- 6,579
Originally posted by 25skeet
knew would hav to remove debree but did not kno if I wuold need to add a dryer.
Hey skeet, I just did an 8-hour seminar in Great Falls at the Johnstone Supply and I covered just what you need to know. You should have attended.
Do you service gas heating systems? I will be back to do a heating seminar in a few months.
-
07-04-2005, 11:41 AM #9
Regular Guest
- Join Date
- May 2004
- Posts
- 23
Where in Great Falls there is not a johnstone supply here only in Billings. How can I get a flyer or something that tells me the time and date.
Originally posted by NormChris
Originally posted by 25skeet
knew would hav to remove debree but did not kno if I wuold need to add a dryer.
Hey skeet, I just did an 8-hour seminar in Great Falls at the Johnstone Supply and I covered just what you need to know. You should have attended.
Do you service gas heating systems? I will be back to do a heating seminar in a few months.
-
07-04-2005, 11:51 AM #10
Professional Member
- Join Date
- Sep 2002
- Location
- South Dakota
- Posts
- 6,579
Sorry, I meant Missoula. I did held classes in both Missoula and Billings. No exact date set yet for the heating seminar. Check with the Johnstone people in Missoula. They need to give me the date.


Reply With Quote