Results 1 to 5 of 5
  1. #1
    Join Date
    Apr 2005
    Location
    Richmond, Virginia
    Posts
    365
    I've got a Lennox AHU I'm trying to figure out the capacity of. It's CBH19-41-1P looks like a 3.5 ton with 10 KW strip.

    Any help would be appreciated.

    Thanks
    Sean Cantrell

  2. #2
    3 ton

  3. #3
    Join Date
    Nov 2001
    Location
    east kansas
    Posts
    8,032
    You need to be very careful when sizing a AH with a Lennox heatpump. You must check the Engineering Data for correct matches.

  4. #4
    Join Date
    Dec 2003
    Location
    Corpus Christi TX
    Posts
    206
    airworx is correct
    41=3 ton
    46=3.5 ton
    Big leaps get you there faster, small steps keep you there longer.

  5. #5
    Join Date
    Nov 2001
    Location
    east kansas
    Posts
    8,032
    Originally posted by lynn rodenmayer
    You need to be very careful when sizing a AH with a Lennox heatpump. You must check the Engineering Data for correct matches.
    Gee Lynn, that was good advice. I would not sell a Lennox heat pump and AH without checking the Eng. Data first. I've seen the same AH matched with different size Outdoor units. Check it or be sorry come winter and you are locking out on high head pressure.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event