carrier vvt
Results 1 to 2 of 2

Thread: carrier vvt

  1. #1
    Join Date
    Jan 2005
    Location
    SE Florida
    Posts
    220
    hey guys, what's the first screen that comes when you enter the programming mode in the vvt monitot t-stat? it's category 1 (bottom) and the options start from 10(top left)? after going to 12 why can't i back it down to 10 again. does 12 mean 1.2 the heating set point high limit?

  2. #2
    Join Date
    Oct 2002
    Posts
    970
    1.2 means category 1, option 2. heating set point high limit.

    there is only 6 options in cat 1.

    http://www.xpedio.carrier.com/idc/gr...it/vvt-1si.pdf

    [Edited by sonc on 06-30-2005 at 03:08 AM]
    I work with the Chiller Whisperer...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event