Results 1 to 2 of 2
  1. #1
    Join Date
    May 2004
    Posts
    61
    Post Likes
    The unit is on a ledge up high in the home owner's bedroom and this inside unit is just out of range of it's remote control. Does anyone know how I can boost the remote signal or put in a receiver. Or even better do they make a wall t-stat with wires?

  2. #2
    Join Date
    Jun 2003
    Location
    Chicago, IL
    Posts
    4,805
    Post Likes
    if the remote uses an infared beam (you have to point it at the unit for it to work, like a TV) you can get a signal amplifier for it. it looks like a pyramid about 5 inches tall. you put the pyramid halfway between the remote and the unit and plug it in. it receives the infared signal and sends out a new, stronger signal in all directions.

    if the remote uses a radio signal instead of infared, then i don't know what to tell you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event