www.atcoflex.com/products/series/alumseries.html
If the link doesn't work search the company ATCO
In my geographical area flex duct is the norm for residential and new construction. You will have a duct board (1 1/2") trunk line with flex runs to outlet boxes. Hard duct tie in's are not the norm...costs prohibitive. Metal duct is exclusively for large (high static pressure) commercial applications only. Welcome to S. Texas...
www.atcoflex.com/products/series/alumseries.html
If the link doesn't work search the company ATCO
I love the stuff. I've been using it for 18 years in crawl spaces and attics and have never had a problem. Costs more than wireflex but lasts way longer, especially in area's prone to damage. I still offer rigid steel duct as a first choice though, but the older I get the more appealing it is to just offer the flex duct as it gets me out of the crawl space's a lot quicker.
I know prices aren't supposed to be discussed on this forum but, realtive to typical (not the best and not the worst) flex dcut, how much more does this aluminum flex cost?
Try NSI Supply or SPS Supply , in Ca they go by Heating and Cooling. I have used this product and it is better than flex, it is cheaper than spiral, it does not bend like flex and it should not be used in a vertical shaft (it will come apart). Airflow resistance should also be considered. The biggest challenge is R-8 insulation because you cannot tell if the duct has collaped when it is bent around obstructions. I still prefer spiral and long radius ells over endflex or flex duct on any given day. The quality of the job is only as good as the materials and workmanship being used.
acwizard, can you post a picture or two of installs where you used this product?
I went to the website, but pic n/a.
as for the deteriorating inner liner on older flex, I've never seen that here.
but lots of humidity here and much different climate than arizona/ca.
I can't remember who posted a pic with exterior blue sleeve in shreads,
had the inner liner failed on that also?
would different climates cause interior liner to deteriorate??
sorry to get off topic (again) but I learn a lot from you folks.
thanks!
The cure of the part should not be attempted without the cure of the whole. ~Plato
Take a look at this link.