Results 1 to 11 of 11
Thread: Installation Question
06-20-2005, 12:06 PM #1Regular Guest
- Join Date
- Jun 2005
Well we got the Amana and we am very happy with it, thanks for all your input in helping us make the decision. Unfortunately I am concerned with an aspect of the installation and I am hoping one of you can help me. Bare with me as I don't know the technical names.
Okay, you know where the chimney part of the furnace/blower meets the air duct that goes into the attic....well the new furnace/blower has a much bigger chimney than the air duct that goes into the attic. Now instead of some kind of sleeve to join the two there is just uncovered fiberglass insulation covering the gap. Is this how it is supposed to be done?
This seems unhealthy to me and what even made me pick up the insulation was the fact that I saw a piece of the fiberglass insulation in my bedroom register and it got my curiosity going.
I sure appreciate any help I could have with this. Please let me know if you have any questions or if it is not clear what I am explaining.
Thanks so much,